# Run ATVM Automation Runs

This file stores run-specific examples only when a run produced a new learning relevant to future automation tasks.

## Entry Rule
- Add an entry only when a run changed workflow behavior, exposed a failure mode, or confirmed a required new check.
- Do not add routine runs with no new learning.

## Current State
- No run-learning entries recorded yet from `atvm-automation-guide.md` source material.

## Run Learning: 2026-03-08 (E2E redhat9.7, pure/fc)
- Request:
  - template: `cmc-e2e`
  - filter: `--containsVm redhat9.7`
  - integration: `--integration_type pure`
  - plugin: `--use_specified_plugin fc`
- Observed result:
  - Cypress spec execution passed (`1` test, `1` passing, `0` failing).
  - Cloud run URL was produced and marked uploaded.
  - `run-sorry-cypress.py` remained running afterward with a defunct `npm exec cypress-cloud` child process and did not exit cleanly on its own.
- Action for future runs:
  - If pass/upload is confirmed but `run-sorry-cypress.py` does not exit, treat it as a runner hang condition.
  - Capture run URL and pass/fail status first, then terminate the stuck runner process cleanly.

## Run Learning: 2026-03-09 (Blacklist handling and status format)
- Observed requirement:
  - Some ATVM machines must be skipped even when a broad selector such as `--containsVm` or `--randomize` would otherwise include them.
- Machines to blacklist via `--exclude_partial_match`:
  - `BLACKLISTED: CMC INSTALL - CAN'T COMPILE`:
    - `atvm6-centos6.0`
    - `atvm41-redhat6.0`
    - `atvm73-oracle6.0`
  - `BLACKLISTED: SUPPORT REQUEST - WAITING`:
    - `atvm113-debian9.0.0`
    - `atvm115-debian9.1.0`
    - `atvm116-debian9.2.0`
    - `atvm156-debian9.3.0`
  - Needs re-creation:
    - `atvm157-debian13.0.0`
- Action for future runs:
  - Add these machine names to `--exclude_partial_match` when building broad-scope automation commands.
  - When reporting run status, include skipped blacklisted machines separately with their reason, in addition to completed and remaining machines.
  - Use the run `build_name` as the heading/title for status responses so the test type is obvious.
  - For failed machines in status responses, include the failure reason taken from the run log.
  - Include timing details in status responses: start time, end time when complete, and total or elapsed runtime.
  - Also include timing stats in status responses: quickest completed test runtime, longest completed test runtime, and average completed test runtime.

## Run Learning: 2026-03-11 (Machine-first status lines and whole-run ETA)
- Observed requirement:
  - Status output must list each machine first and then its status, rather than leading with the status label.
  - Estimated completion time must refer to the entire remaining automation run, not only the currently running machine.
- Action for future runs:
  - Format machine entries as `machine-name - STATUS`.
  - Keep failure reasons after the machine/status entry when a machine failed.
  - When giving ETA, explicitly state it is the estimate for completion of the full remaining run.

## Run Learning: 2026-03-11 (Categorized run status must be reconstructed across batches)
- Observed failure mode:
  - `run-sorry-cypress.py --categorize` mutates the active config to the current category batch, so live files such as `specPattern`, `current_vm`, and the newest `/tmp` Cypress JSON only describe the current category, not the full automation run.
  - Answering from only the current live batch underreports the run and misses already-finished machines from earlier category batches.
- Action for future runs:
  - Reconstruct whole-run status from the generated machine scope plus all machine result artifacts written since the run start time.
  - Use the current batch only to identify the live `RUNNING` machine and immediate next machine(s), not as the full run scope.
  - Do not answer status requests for categorized runs until earlier category results have been checked as part of the same run.

## Run Learning: 2026-03-11 (Hash-named XML files still belong to machine runs)
- Observed failure mode:
  - Same-run JUnit output is not consistently named `test-result-atvm...xml`.
  - Many machine results for the same automation run were written as hash-named files such as `test-result-01fe412894862398d06d9cc4bc7e81a0.xml`.
  - Limiting status reconstruction to machine-named XML files causes major undercounting of completed machines.
- Action for future runs:
  - Parse all `test-result-*.xml` files written since the run start time, not only `test-result-atvm*.xml`.
  - Extract the machine name from XML contents such as `testsuite file=`, `testsuite name=`, or `testcase name=` when the filename does not include the machine name.
  - Treat `check-xml-files.ts` XML outputs as bookkeeping steps, not machine results.
  - Prefer the most recently written same-run XML per machine when multiple XML files exist for that machine.

## Run Learning: 2026-03-12 (Status output must be one machine per line with notes separated)
- Observed requirement:
  - Listing multiple completed machines on one line makes run status harder to scan and does not meet the expected reporting format.
  - Failure reasons and extra context should be separated from the machine status list so the list stays clean.
- Action for future runs:
  - Under completed, skipped, and remaining sections, put exactly one machine status on each line.
  - Add a `Notes` section after completed machines for failure reasons, anomalies, and other operator-relevant context.
  - Keep completed machine lines in the form `machine-name - STATUS` and avoid appending long explanations inline.

## Run Learning: 2026-03-12 (Add suse15.0 machine to blacklist)
- Observed requirement:
  - `atvm144-suse15.0` must be excluded from automation runs because it crashes while creating the migration session.
- Action for future runs:
  - Add `atvm144-suse15.0` to the maintained blacklist.
  - Record the reason as `CRASHES WHEN CREATING MIGRATION SESSION - BUG`.
  - Include it in reusable `--exclude_partial_match` command examples.

## Run Learning: 2026-03-12 (Default to gold-named ATVM config files)
- Observed requirement:
  - The automation VM does not reliably have `cypress.atvm-config.ts`, and defaulting to that filename can break runs before they start.
  - Operator preference is to use ATVM config files with `gold` in the filename unless explicitly told otherwise.
- Action for future runs:
  - Do not reference `cypress.atvm-config.ts` by default in commands or examples.
  - Default to `cypress.atvm-config-gold.ts` unless the operator explicitly requests another config.

## Run Learning: 2026-03-12 (Examples are reference-only, not default intent)
- Observed requirement:
  - Reusable examples may contain extra excludes or options that the operator did not ask for.
  - Carrying those example details into a new run without confirmation can change the requested scope.
- Action for future runs:
  - Treat `atvm-automation-examples.md` as reference-only.
  - Use only the options the operator explicitly requested, plus maintained mandatory blacklist handling.
  - Do not assume extra example exclusions such as distro filters are desired unless the operator asks for them.

## Run Learning: 2026-03-12 (Use one status format for all automation run types)
- Observed requirement:
  - The operator wants the same ATVM run status display every time, regardless of whether the run is `e2e`, `systemOS`, `reboot`, or another template.
  - Changing the display style between run types makes the status harder to scan and compare.
- Action for future runs:
  - Use one consistent ATVM status layout for all automation status responses.
  - Keep the order the same: build name, completed machines, notes, skipped machines, remaining machines, summary, timing, estimated completion time.
  - Keep machine entries one per line as `machine-name - STATUS` regardless of test type.

## Run Learning: 2026-03-13 (Put longer failure description on failed machine line)
- Observed requirement:
  - Failed machines are easier to scan when the failure description appears directly on the same line as the machine status.
  - A longer same-line description works better than a very short label when the extra detail helps explain what actually failed.
- Action for future runs:
  - Format failed machine lines as `machine-name - FAIL - <failure description>`.
  - Prefer the longer same-line description when it adds useful operator-facing context.
  - Keep `Notes` for broader context, anomalies, and extra follow-up detail beyond the machine-specific failure description.

## Run Learning: 2026-03-14 (Missing requested ATVM config must fail fast)
- Observed requirement:
  - If the operator asks for a specific ATVM config file and that file is missing on the automation VM, looking for other config files or substituting a different one creates the wrong next step.
  - The operator wants to decide what to do after a missing-config failure.
- Action for future runs:
  - If the requested config file is missing, stop immediately and report the missing filename.
  - Do not search the automation VM for alternate config files.
  - Do not switch to another config unless the operator explicitly instructs it.

## Run Learning: 2026-03-16 (Status requests default to live view with whole-run historical fallback)
- Observed requirement:
  - When the operator asks for ATVM automation run status, they want live status by default.
  - If no automation is currently running, the status response must fall back to the most recent historical run.
  - For categorized runs, the response must still cover the entire run rather than only the latest category batch or cloud sub-run.
- Action for future runs:
  - Treat every ATVM status request as a request for live run status unless the operator explicitly asks for something else.
  - If no automation is active, reconstruct status from the most recent historical run artifacts and logs.
  - For categorized runs, always aggregate all same-run category batches so the response covers the full run scope.

## Run Learning: 2026-03-17 (Default ignore-force-shutdown and iscsi plugin)
- Observed requirement:
  - The operator wants `--ignore_force_shutdown` included on every ATVM automation run by default.
  - The operator wants plugin selection to default to `--use_specified_plugin iscsi` unless a different plugin is explicitly requested.
- Action for future runs:
  - Add `--ignore_force_shutdown` to every `cmc-templates.py` command unless the operator explicitly asks not to use it.
  - Default plugin-bearing ATVM automation commands to `--use_specified_plugin iscsi`.
  - Only switch away from `iscsi` when the operator explicitly requests `fc`, `both`, or another applicable override.