Add detailed ATVM reboot test flow

atvm/watcher-service/atvm_run_watcher.py

@@ -87,6 +87,41 @@ TEMPLATE_TEST_FLOWS = {
         "20. Uninstall CMC on the host",
         "21. Power off the host",
     ],
+    "cmc-reboot": [
+        "1. Verifying set up",
+        "2. Power on and obtain ip address and host name",
+        "3. Uninstall CMC if still exists",
+        "4. Setting up disk on the host",
+        "5. Copy CMC install command from GUI",
+        "6. Install CMC on the host",
+        "7. Create migration session",
+        "8. Tracking Changes",
+        "9. Create reboot validation file on the source disk",
+        "10. Trigger cmotion",
+        "11. Reboot the host",
+        "12. Update disk info after power on",
+        "13. Mount source disk",
+        "14. Verify reboot validation file after reboot",
+        "15. Create second reboot validation file on the source disk",
+        "16. Revert cmotion",
+        "17. Reboot the host",
+        "18. Update disk info after power on",
+        "19. Mount source disk",
+        "20. Verify second reboot validation file after reboot",
+        "21. Trigger cmotion and do I/O test during cmotion",
+        "22. Revert cmotion",
+        "23. Verify data with md5 checksum for the I/O test",
+        "24. Trigger cmotion again",
+        "25. Finalize cutover",
+        "26. Create migration report",
+        "27. Delete migration session",
+        "28. Verify local destination disk",
+        "29. Remove host and disks",
+        "30. Remove enabled integration",
+        "31. Uninstall CMC on the host",
+        "32. Clean up iSCSI targets",
+        "33. Power off the host",
+    ],
 }